Issue Date:  November 27, 2017

Veeder-Root

8601 Series
with Discriminating Groundwater Sensor for 7’ to 10’ Well Depths 794380-621,
Discriminating Groundwater Sensor for 10’ to 15’ Well Depths 794380-622, Discriminating
Groundwater Sensor for 15’ to 20’ Well Depths 794380-624

OUT-OF-TANK PRODUCT DETECTOR (LIQUID-PHASE)

Detector:

Output type:

qualitative

Sampling frequency:

continuous

Operating principle:

electrical conductivitys

 

Test Results:

 

 

unleaded
gasoline

synthetic
gasoline

Discriminating Groundwater Sensor for 7’ to 10’ Well Depths 794380-621, Discriminating Groundwater Sensor for 10’ to 15’ Well Depths 794380-622, Discriminating Groundwater Sensor for 15’ to 20’ Well Depths 794380-624    

Detection time (min:sec)

08:55

06:18

Fall time (min:sec)

54:50

26:02

Lower detection limit (cm)

0.02

0.02

Specificity Results (in addition to above):
Activated:  n-hexane, diesel, jet-A fuel, toluene, xylene(s).

Comments:
Sensors are reusable. Sensor is easily removed, cleaned, and reinstalled.
The consoles in the 8601 Series are identical other than their name for marketing purposes. Each of the consoles within the series will perform identically.
The 8601 Series consists of the following derivatives: TLS4, TLS4B, TLS4c, TLS4i, and TLS-S1 consoles.
The 794380-621 sensor is a discriminating groundwater sensor for 7’ to 10’ well depths. The 794380-622 sensor is a discriminating groundwater sensor for 10’ to 15’ well depths. The 794380-624 sensor is a discriminating groundwater sensor for 15’ to 20’ well depths. These sensors are designed to detect the presence of hydrocarbon product on the water table in monitoring wells. These sensors consist of a float switch to insure sensors are submerged in water as well as a product sensitive cable to detect the presence of hydrocarbon product. These sensors contain a product sensitive strip that will detect the presence of hydrocarbon product in the groundwater well. If hydrocarbon product is present in the groundwater well and it rises above the threshold of the product sensitive strip, a product alarm will be generated.
For all sensors, console alarm is indicated by an audible alarm, a displayed message and a printed message (if the console is equipped with a printer.) The alarm is also recorded as part of Alarm History Report.

 

Veeder-Root

Evaluator: Ken Wilcox Associates

125 Powder Forest Dr.

1125 Valley Ridge Dr

Simsbury, CT  06070-2003

Grain Valley, MO 64029

Tel:  (860) 651-2700

Tel: (816) 443-2494

E-mail:  info@veeder.com

Date of Evaluation: 1/9/2017

URL:  www.veeder.com

 
 

 | Home | Vendors: A - F | Vendors: G - M | Vendors: N - S | Vendors: T - Z | Method Index | Glossary |

Appearance on this list is not to be construed as an endorsement by any regulatory agency nor is it any guarantee of the performance of the method or equipment.
Equipment should be installed and operated in accordance with all applicable laws and regulations.  For full details, please refer to our expanded "DISCLAIMER" page.