Issue Date: April 18, 1997
Revision Date: July 12, 2017

Simmons Corp.

SIR 5.7 LM


Certification Leak rate of 0.2 gph with PD > 99.9% and PFA = 0.0%. 
Leak rate of 0.1 gph with PD > 99.0% and PFA < 1.0%.
Leak Threshold 0.1 gph for leak rate of 0.2 gph. 
0.05 gph for leak rate of 0.1 gph. 
A tank system should not be declared tight if the test result indicates a loss or gain that equals or exceeds this threshold.
Gains (water ingress) are analyzed and evaluated on an individual basis.
Applicability Gasoline, diesel , new crank oil, used crank oil, aviation fuel, kerosene, waste oil. 
Tank Capacity Maximum of 60,000 gallons for single tank. 
Maximum of 60,000 gallons cumulative capacity for manifolded tank systems with no more than 5 tanks in system.
Data Requirement Minimum of 27 days of product level and flow through data.
Comments 61% of data sets evaluated were from manifolded tank systems. 
17% of data sets evaluated used data collected by Automatic tank gauges. 
Of 41 data sets submitted for evaluation, all were analyzed with conclusive results. 
Median monthly throughput of tanks evaluated was 55,791 gallons. 
Leak rates of 0.05, 0.1 and 0.2 gph were used in evaluation. 
Data sets evaluated were supplied by evaluator.


Simmons Corp.

Evaluator:  S.S.G. Associates

106 E. Main Street

Tel:  (662) 234-1179

Richardson, TX 75081-3327

Dates of Evaluation:  10/28/95, 02/15/00, 09/03/01

Tel:  (800) 848-8378



 | Home | Vendors: A - F | Vendors: G - M | Vendors: N - S | Vendors: T - Z | Method Index | Glossary |

Appearance on this list is not to be construed as an endorsement by any regulatory agency nor is it any guarantee of the performance of the method or equipment.
Equipment should be installed and operated in accordance with all applicable laws and regulations.  For full details, please refer to our expanded "DISCLAIMER" page.